So I’ve been playing with the copper tarnish/patina process and I think I’ve got it figured out. After doing lots of small parts with various approaches I’ve learned enough to start the amp pieces. Among the things I’ve learned is that the washing process both before immersion in the chemical bath and after tarnishing while washing off the chemicals is very important. I’ve also learned that an even buff with a steel wool is better than taking the copper to a high gloss shine. And finally, the initial tarnish is very fragile. After doing the bath and letting the piece dry, it really should be left sitting in the open air for between three and five days. After this, the oxide layer toughens up and it can be handled and clear coated.